BPGXR - QZ 3296 POLYIMIDE ETCHER

  • MSDS: BPGXR
  • Manufacturer: CIBA GEIGY CORP
  • Product Name: QZ 3296 POLYIMIDE ETCHER
  • National Stock Number: 6850-00N031053
Product Identification

Product ID:QZ 3296 POLYIMIDE ETCHER
MSDS Date:04/01/1986
FSC:6850
NIIN:00N031053
MSDS Number: BPGXR

Responsible Party
CIBA-GEIGY CORP
THREE SKYLINE DR
HAWTHORNE, NY 10532
US

Emergency Phone: 914-347-4700; 800-334-9481

Info Phone: 914-347-4700

Cage: 07566

Contractor
CIBA-GEIGY CORP ADDITIVES DIV.
HAWTHORNE, NY 10532-2119 US

Telephone: 800-888-8372

Cage: 07566

Ingredients

2(3H)-FURANONE, DIHYDRO-; (DIHYDRO-2-FURANONE) (GAMMA -

CAS: 96-48-0

RTECS: LU3500000

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)1680 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:MINOR IRRITANT. EYE:IRRITANT.
INHAL: BREATHING VAPORS MAY BE HARMFUL.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION, DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA OR SKIN CONDITIONS.

First Aid

First Aid:EYES:FLUSH W/WATER FOR AT LST 15 MINUTES. CALL MD IF IRRIT
DEVELOPS. SKIN:WASH W/MILD SOAP & WATER. PROMPTLY REMOVE WET CONTAM
CLTHG TO AVOID FIRE & HLTH HAZARDS, WASH BEFORE REUSE. INGEST:IF
CONSCIOU S, GIVE LG QTYS OF WATER. GET MD. INHAL:REMOVE TO FRESH
AIR. GIVE O2 IF BRTHG IS DFCLT.

Fire Fighting

Flash Point Method:CC
Flash Point:198F,92C
Lower Limits:1.4%
Upper Limits:6.9%
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
BE TOXIC.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. PROVIDE GOOD
VENTILATION. TAKE UP ON ABSORBENT MATERIAL. SHOVEL INTO APPROVED
CLOSEABLE CONTAINER. FLUSH CONTAMINATED AREA W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:CAUTION! MAY CAUSE IRRITATION.
COMBUSTIBLE LIQUID. AVOID CONTACT W/EYES, SKIN OR CLOTHING. AVOID
BRTHG VAPOR, MIST OR SPRAY.
Other Precautions:KEEP AWAY FROM OPEN FLAMES & SPKS. STORE IN CLSD
CNTNRS. USE W/GOOD VENT. MATL WILL NOT BE SOLD FOR USE IN PRODS FOR
WHICH PRLNG CONT W/MUC MEMBS/ABRADED SKIN/IMPLANTATION IN HUMAN
BODY IS INTENDED. N OT RECOM FOR SUCH USES.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC CHEMICAL CARTRIDGE
RESPIRATOR, IF NEEDED.
Ventilation:GOOD GENERAL MECHANICAL VENTILATION RECOMMENDED.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE EQUIPMENT TO PREVENT
EXPOSURE & PERSONAL CONTACT.
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:>399F,>204C
Vapor Pres:<1 @ 25C
Vapor Density:>AIR
Spec Gravity:1.1 (H2O=1)
Solubility in Water:MISCIBLE
Appearance and Odor:COLORLESS LIQUID; MILD ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2, ALDEHYDES.

Disposal

Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.